-
There's no single "right" window treatment for an office
-
The first question is what the space has to do
-
Scenario A: standard office space — buy boring
-
Scenario B: client-facing space — buy control
-
Scenario C: multi-site rollout — stop buying, start building
-
Scenario D: small spaces — the counterintuitive advice
-
How to tell which scenario you're in
-
One thread runs through all four: TCO, not unit price
There's no single "right" window treatment for an office
I took over procurement for a 180-person company in 2020. Since then I've managed four window treatment installations across two buildings—two standard office rolls, one client-facing conference center, and one rushed retrofit after a lease turnover.
Every time someone asks me which brand or fabric we "standardized on," they want one word. I don't have it. The times I pretended I did were the times I got burned.
Here's what actually works: stop looking for one answer. Figure out which of four scenarios you're in, then pick the approach that fits. The advice for a standard office is genuinely wrong for a multi-site rollout, and vice versa.
The first question is what the space has to do
Most buyers start with price, or with whatever the last building used. That's backwards. Start with the job the room has to do, then work backward to product.
Four categories cover almost everything I've seen:
- Scenario A — standard office space. Predictable users, budget pressure, nobody's watching except the people who work there.
- Scenario B — client-facing space. Boardroom, hospitality, lobby. Appearance is on the line.
- Scenario C — multi-site or phased rollout. You're buying the same thing more than once, often on a schedule.
- Scenario D — small or temporary space. Fewer windows, lower stakes, and a strong temptation to just pick the cheapest quote.
Notice what's missing: brand. Brand is a variable inside these scenarios, not a starting point.
Scenario A: standard office space — buy boring
For a standard office, the failure mode isn't buying cheap. It's buying custom. Custom widths, custom fabric, custom hardware—all of that drives lead time and price up, and in a standard office nobody notices the difference.
What I do now: standard fabric in the running colorway, standard widths, single vendor, batched order. If the spec allows, I use a nylon rod and a simple bracket set instead of decorative hardware. Cheaper, lighter, installs faster, and nobody has ever complained.
One thing worth checking: whether the fabric cleans up with a damp cloth. In an office with shared desks, that matters more than a color-fastness rating. Ask directly—don't assume.
Lead time on standard orders ran three to four weeks on my last project, though I might be misremembering—verify before you promise anything to the office manager.
Scenario B: client-facing space — buy control
Here the problem flips. In a boardroom or a lobby, the risk isn't overpaying for custom work. It's inconsistency between dye lots.
I learned this the expensive way. We ordered a second batch of shades for a conference room three months after the first. Same product code, same fabric name. The second batch was noticeably warmer under the room lights. The client noticed before I did.
Color variation between lots is measured on the Delta E scale. Industry guidelines treat anything below 2 as effectively imperceptible; 2–4 is where trained eyes start to see it. Above that, a "matching" replacement looks off next to the originals (Reference: CIE / Pantone color management guidance).
For a client-facing install, I now do three things: order the full quantity in one shipment, keep the dye lot number on file, and require a physical sample sign-off—not a screen render. If the client cares about the brand mark on the hardware or fabric (and some do—"logo Hunter Douglas" shows up in more spec sheets than you'd think), confirm it's actually on the order before installation day, not after.
Designers hate hearing this, but the sample sign-off is non-negotiable for me now. It's saved more relationships than it's cost.
Scenario C: multi-site rollout — stop buying, start building
This is where most organizations quietly waste the most money, and it doesn't show up as a line item.
The mistake is treating a rollout as a series of individual purchases. Site A orders, site B orders later, site C orders from a different rep because the first one was on vacation. Three months in, you have three versions of the same product and no way to tell which one is "correct."
What works instead: standardize the SKU, not just the product family. Build one catalog entry for each window type and stick to it. Use the same vendor portal for everything—whether that's the brand's own ordering system (the Hunter Douglas app handles multi-property order history reasonably well) or a fabric supplier's dashboard like the Liberty Canvas login for spec sheets and inventory status.
Portal visibility sounds like a minor convenience. It isn't. Being able to see real-time order status across four sites without emailing three reps is the difference between catching a delay in time and explaining it to your VP after the fact.
Scenario D: small spaces — the counterintuitive advice
Here's where I'd push back on most procurement instincts. In a small space, the cheapest option is usually the most expensive.
Why: installation is a fixed cost per visit, and it doesn't shrink with order size. If you buy the wrong cheap product and have to reinstall, you're paying for installation twice—and the second install often costs more because the first one left holes, brackets, or damaged trim you now have to fix.
For a small office or a short-term space, stay with a standard product, but don't chase the lowest bid. Pick a vendor with a clear return policy and a fixed installation quote. And if the frame needs repainting anyway, do it before the new shades go up—otherwise you're paying someone to take them down, paint, and put them back.
While you're at it: most of the "best acrylic paint brands" lists online are written for homeowners, not commercial trim. For office frames that see a janitorial wipe-down every week, check the sheen and scrub rating before the brand name.
How to tell which scenario you're in
Two questions usually settle it:
- Will non-employees see these windows? If yes, you're in B. Everything about the buying process changes.
- Is this one space or more than one? If more than one—on a schedule or in phases—you're in C.
If it's a small or temporary space and you're not in B or C, you're in D—and the cheap-quote instinct is the one to resist. Everything else is A, and A is the one scenario where "boring and standard" is genuinely the right answer.
One more check: if you're not sure whether you're in A or B, ask a designer or a facility manager who has actually stood in the room. Not the sales rep.
One thread runs through all four: TCO, not unit price
I keep coming back to the same framework. The number on the quote is the smallest part of what you'll pay.
The real number includes:
- Unit price × quantity
- Shipping and delivery windows
- Installation, per visit, including patching and cleanup
- Return or repair costs when something's wrong
- Time spent coordinating, chasing, and reordering
- The cost of inconsistency, when a rolled-out product doesn't match later
A $500 quote nearly always turns into $800 by the time it's up. A $650 all-inclusive quote is usually the cheaper one. That's not a pricing trick—it's just which costs the vendor decided to disclose. (Figures are from my own projects; verify current rates with your vendor.)
I calculate total cost of ownership before I compare any two quotes now. It's a boring habit. It's also the only habit that ever kept me out of a conversation with my VP about why the numbers didn't match.